Skip to content
Clear Bridge Water
Menu

York County, SC

Water Treatment in Fort Mill, SC

Fort Mill homes on Town of Fort Mill get soft, treated city water. Here's what's worth treating, and what isn't.

Local water snapshot

Town of Fort Mill

From its 2025 water quality report · read the full report

Water source
Purchased from the City of Rock Hill (Lake Wylie raw water, treated at the Rock Hill plant)
Town of Fort Mill serves about 25,000 people.
Town of Fort Mill, 2025
Hardness
35 mg/L
About 2 grains per gallon: soft by USGS classes. As reported (2025).
Town of Fort Mill, 2025
Disinfectant
Chlorine dioxide and chlorine
City of Rock Hill Utilities (hosted by York County, SC), 2025
TTHM (disinfection byproducts)
32 ppb
As reported (2025); federal limit 80 ppb.
Town of Fort Mill, 2025
HAA5 (disinfection byproducts)
16 ppb
As reported (2025); federal limit 60 ppb.
Town of Fort Mill, 2025
Lead (at sampled homes' taps)
0 ppb
90th percentile of homes sampled (2024); 1 sampled home above the action level. The federal action level is 15 ppb.
Town of Fort Mill, 2025
Violations
None marked
No violation is marked in the report's results tables.
Town of Fort Mill, 2025

What this means for your home

Fort Mill is inside Town of Fort Mill's service area as mapped by local government.

  • At 35 mg/L (about 2 grains per gallon), Town of Fort Mill water is soft. You very likely don't need a water softener.
  • Town of Fort Mill uses chlorine dioxide along with chlorine. If you notice a chlorine taste or smell, NSF/ANSI 42 certified carbon reduces it.
  • Disinfection byproducts (TTHM) were 32 ppb against an 80 ppb limit. That's compliant; some households still prefer a margin, which NSF/ANSI 53 carbon or reverse osmosis provides.
  • 12.6% of homes in Fort Mill were built before 1980. EPA notes homes built before 1986 are more likely to have lead in their plumbing, so a certified-lab lead test at the tap is a sensible first step in an older home.

How it works

  1. Step 1

    Test

    We read your utility's report with you, and run a certified-lab test when your home calls for one.

  2. Step 2

    Design

    You get a written recommendation and quote for only what the data supports.

  3. Step 3

    Licensed install

    An independent licensed plumber installs under a separate agreement with you.

  4. Step 4

    Retest

    We confirm the system is doing what it's certified to do.

More on how it works

Fort Mill at a glance

Fort Mill water questions

Who supplies water in Fort Mill?

Fort Mill is inside Town of Fort Mill's service area as mapped by local government. Its supply is purchased from the city of rock hill (lake wylie raw water, treated at the rock hill plant). EPA's registry lists it serving about 25,000 people.

Is Fort Mill water hard?

Town of Fort Mill reported hardness of 35 mg/L in its 2025 report, which is soft by USGS classes. Most homes on it don't need a softener.

Does Town of Fort Mill report PFAS?

Its latest report doesn't include PFOA or PFOS results we can publish. EPA's enforceable limits for PFOA and PFOS are 4.0 parts per trillion; other proposed PFAS limits are under review.

How old are homes in Fort Mill, and does that matter for water?

Census estimates put 12.6% of Fort Mill homes as built before 1980. Lead usually comes from a home's own plumbing, not the utility, so in older homes a certified-lab lead test at the tap is the honest starting point.

Do you serve Fort Mill?

Yes. Fort Mill is about 30 minutes from our Charlotte base. Installation is performed by an independent, SC-licensed plumbing contractor under a separate agreement with you.

Do I need a permit to install a water treatment system?

Whole-house treatment is plumbing work in South Carolina. Your independent licensed plumber determines and pulls any permit York County requires.

Get an honest answer about Fort Mill water.

Tell us about your home and water source. We'll recommend testing first, and only the equipment your results support.

CallGet my quote